Inspection items before using china Mooney Vicometer
China Mooney Vicometer is an instrument used to measure the Mooney viscosity of raw rubber or compounded rubber. China Mooney Vicometer suppliers remind everyone to carefully check before use to ensure that there is no fault before use, China Mooney Vicometer Supplier inspections include the following:
1. Distilled water should be used as the heat transfer medium of the thermostat, and the addition limit should be about 30mm lower than the plate cover. Then plug in the power supply, turn on the power supply, start the circulating pump, carefully adjust the contact thermometer to the required temperature, and turn on the heating switch until the temperature is constant. The indicator light starts to be on and off, and the heating can be stopped.
2. Connect and check the rubber tube components used in the medium circulation passage. China Mooney Vicometer suppliers reminds everyone to pay attention to observe the connection and sealing state to prevent accidents such as leakage damage.
3. Appearance inspection of China Mooney Vicometer: whether the viscometer measuring device, indicator plate and bracket, super thermostat, medium circulation path connection, etc. are in good condition or normal, whether the power cord and power plug are connected or in good contact, and whether the power indicating device is in good condition. Whether the indication is normal or not, use it after confirming that it is normal.