How to Use a Mooney Viscometer for sale？
The Mooney Vicometer for sale is used for the determination of compound viscosity and cure index. When the sample is at a certain temperature and pressure, the rotor applies a certain shearing force to the sample with a certain rotating moment, and the instrument measures the reverse shearing moment of the rubber. Mooney Vicometer for sale is an indispensable instrument in the reclaimed rubber, rubber, wire and cable industries.
The performance index of Mooney Vicometer for sale must meet the requirements of national metrological verification regulations. The Mooney Vicometer for sale in use should be periodically verified, and if necessary, an intermediate self-check should be carried out to ensure that its measurement performance is qualified and the coefficient error is within the allowable range, otherwise accurate data cannot be obtained.
When using a Mooney Vicometer for sale, pay special attention to the temperature of the liquid being measured. Many users ignore this point and think that the temperature difference does not matter. Experiments have shown that when the temperature deviation is 0.5 °C, the viscosity value deviation of some liquids exceeds 5%, and the temperature deviation has a great influence on the viscosity. The temperature increases and the viscosity decreases. Therefore, Mooney viscometer manufacturers remind that special attention should be paid to keeping the temperature of the liquid to be measured constant around the specified temperature point, and the measurement should not exceed 0.1 °C.