Page Copyright @2019 Shanghai Aifafa Instrument Technology Co., Ltd.  www.300.cn 《中华人民共和国电信与信息服务业务经营许可证》 沪ICP备05061880号

TESTING EQUIPMENT

TESTING EQUIPMENT

>
>
NORKA Authorised Service--NAS

NORKA Authorised Service--NAS

NORKAAuthorizedService--NAS Multi-functionRheometerFR100Series:1.        Recordingcurrentsettingofuser’sinstruments;2.        UsingReferenceMaterials(withCertificate)totestandrecordtesteddata;3.      
没有此类产品
Description
NORKA Authorized Service -- NAS
 Multi-function Rheometer FR100 Series:
1.         Recording current setting of user’s instruments;
2.         Using Reference Materials (with Certificate) to test and record tested data;
3.         Cleaning instrument;
4.         Inspecting driving system;
5.         Inspecting eccentric shaft;
6.         Inspecting bearing of main shaft;
7.         Cleaning upper and lower dies;
8.         Inspecting motor and motor controller;
9.         Inspecting and adjust air pressure;
10.      Inspecting exhaust port and muffler;
11.      Inspecting input voltage;
12.      Inspecting main board voltage;
13.      Adjusting parameter of main board;
14.      Recalibrating instrument;
15.      Inspecting guard-shell, on/off switch and position sensor;
16.      Recalibrating die temperature;
17.      Inspecting PC, printer and software system;
18.      Replacing upper and lower seal rings;
19.      Adjusting dies gap;
20.      Retesting with Reference Materials and recording tested data;
21.      Submitting NAS service report;
22.      Suggesting maintenance needed;
23.      Necessary operation and maintenance training;
24.      Issuing Recalibration Certificate.
 
Variable Speed Mooney Viscometer VSMV100 Series:
1.         Recording current setting of user’s instrument;
2.         Using Reference Materials (with Certificate) to test and record tested data;
3.         Cleaning instrument;
4.         Inspecting wire of calibration weight;
5.         Inspecting main bearing;
6.         Cleaning dropped-gum in main shaft;
7.         Cleaning dropped-gum in shaft-end and shaft-hole;
8.         Cleaning upper and lower dies and rotor;
9.         Inspecting alignment of die center;
10.      Adjusting rotor height;
11.      Inspecting motor and motor controller;
12.      Inspecting and adjusting air pressure;
13.      Inspecting exhaust port and muffler;
14.      Inspecting input voltage;
15.      Inspecting main board voltage;
16.      Adjusting parameter of main board;
17.      Recalibrating instrument;
18.      Inspecting guard-shell, on/off switch and position sensor;
19.      Recalibrating die temperature;
20.      Inspecting PC, printer and software system;
21.      Replacing upper and lower seal rings;
22.      Retesting with Reference Materials and recording tested data;
23.      Submitting NAS service report;
24.      Suggesting maintenance needed;
25.      Necessary operation and maintenance training;
26.      Issuing Recalibration Certificate.

 

 
Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待